Hydraulically Operated Post Driver
Hyrdo - Series II - Tractor auxiliary hydraulics required.

12' (3.65m) from under the fully raised weight to ground level.
This machine was developed for contractors and big farms where the machine works hard.
Country that can be a bit dry or where the posts being used are larger or taller then a standard cattle fence.

The Hydro - Series II comes standard with a mechanical winding action to allow for angling. Tilting action is by way of the tractors top link.

This semi compact machine is ideally suited to driving 6', 8' or 10' posts (1.8, 2.4 or 3.m) including split timber posts, timber strainers, railway line, pipe, coppered poles, star pickets and any other item designed for or with the structural capacity to be a post.
We assume the finished height of the driven post will be approximately 4' (1.2m) above ground level.
Our standard machines will not drive a post below 1 metre*.

Options
Hydraulic angle and tilt rams.
Hydraulic auger attachment with a selection of drill sizes.
The principal function of the auger attachment is to drill pilot holes prior to driving posts in hard ground.
In most situations where the soil type is considered average an auger would not be required.

* We offer variations of the standard production machines to suit your particular application.